The market decided A the placeas again that expert job website desk noticeds ought to nicection 10-inch blades powered by 15-amp motors with useful, fpreviousing stands with wheels for transport and storage. There are exceptions to the rule however, by-and-huge, that’s what you’ll discover. But Professional desk noticeds are completely different in rip performance, fence design, construct extreme quality, RPMs, And a quantity of completely different completely different options. The Latest Hitachi desk noticed is The japanese agency’s reply to job website slicing wants. It seems to be a contfinisher for all-round desk noticed excellence, however can it actually stay As a lot As a Outcome of the hype?

These of us Conversant Inside The primary manuactualityurers’ desk noticed choices Shall be quick to say, “Hey! That Hitachi noticed appears like a carbon copy of the Dewalt DWE7499…what provides?” It’s true – there are some primary similarities, however let’s see In the event that they are constructively The identical noticed.

Prime Features


As I talked about, the C10RJ Hitachi desk noticed is powered by a direct drive common 15-amp motor with gentle start pertype and An electrical brake. It pumps out 4,500 RPM As in contrast with the 4,800 from DeWalt; 3,650 from Bosch’s 4100-09; 4,400 from Ridgid’s R4513; and 5,000 from Kobalt’s KT1015. An overload sensor protects the motor from damage. An outmeasurementd power change that consists of an emergency off protectedty cowl protects every thing else.

Blade, Table, & Beveling

The mid-differ RPMs coupled with the 40-tooth carbide tipped blade Means that Hitachi implyt this noticed to do Greater than merely rip tough lumber however Instead gave it the chops to do extra sturdy wooden and cleaner finishes. Truly, woodenworkers will respect the 8 x 13/16-inch dado performance.

The desk furtherly has The power to assist gadgets a lot huger than A lot of its friends. A 28-3/4-inch x 22-inch working desk top extfinishs to A very broad 35-inch rip performance (to The biggest) with The assist of a rack-and-pinion system and rotating fence that echoes DeWalt’s. What’s extra – there’s an outfeed extension of 28-3/4 x 2-inches. Dewalt’s noticed permits a 32-Half-inch rip performance, Bosch and Ridgid a 25-inch performance, and Kobalt a 30-inch. A riving knife and anti-kickagain pawls primarytain the consumer protected the placeas slicing.

Although the miter gauge Is usually An Low price afterthought on most noticeds, the Hitachi 10-inch Job website desk noticed’s T-slot miter gauge has useful detents 0°, 15°, 30°, 45°, and 60° on Every facet. The bevel differ is 0° to 45° for reduce depth Starting from 3-1/8-inch (at 90° ) to 2-1/4-inch (at 45°) and The measurement and peak modifications knobs are Inside The conventional places.

Fprevious/Roll Stand and More

Maybe the standout (or extra appropriately, stand-up nicection) of this Hitachi desk noticed is the fprevious/roll stand. It types the bones of the noticed, permits for accent storage, homes the fprevioused legs, permits the noticed To rework into an upright cart to roll on its 8-inch all-terrain rubber wheels,  and stabilizes the upright noticed for storage.

There’s Simply one mud port on the Hitachi like most job website desk noticeds. DeWalt stands out with one above its removable blade guard. Lastly, the noticed Is roofed by Hitachi’s 2-yr restricted guarantee. Now let’s reduce some stuff up!


My 10-yr previous desk noticed bit the mud shortly earlier than The prospect arose to consider The mannequin new Hitachi desk noticed. So not solely was I Eager to see what the final decade of technological development might do, I merely wanted A mannequin new workhorse to get jobs carried out. I opened the area And located there’s pretty a Little bit of meeting required – I assume there’s no shock there. Be ready to assemble the stand, the riving knife, the outfeed assist, the rack-and-pinion fence, Collectively with the smaller issues Simply like the blade guard. Then the nice can start as you unfprevious the stand and get Proper down to enterprise.

Make A Stand

The stand has A huge stance Which provides you A Method of stability. Many desk noticeds are designed with the legs too shut together such that there’s a hazard the noticed might tip, particularly Everytime you’re slicing An extfinished board or sheet. And also you don’t On A daily basis have The posh of being on A strong floor – many our jobs start from scratch So that you’re working outfacet Inside the shifty Florida sand, so the extra safe the noticed Could be, The extremeer. When you’re In a place to maneuver to The subsequent job or A minimal of pack up your mannequins – which I do Every day – fpreviousing the legs down, tipping the noticed up, and rolling to the truck, and even lifting the 96-pound noticed Could be accomplished by one man.


Table It For Now

An monumental working desk top and the even hugeger 35-inch rip performance is a huge deal. It’s apparent that the extra of the floor of a sheet good that’s assisted By way of the reduce, the extra exact And guarded the operation. The a lot-liked rack-and-pinion fence extfinishs 2.5-inches further on this mannequin than DeWalt’s and seems To primarytain pretty sq.. The fence rotates round to type an edge diploma with the desk top to facilitate The huge rips. The outfeed extension assists to distrihowevere and stabilize The load of The supplies. Really, extra flooring In contact with Every completely different implys extra resistance, which is as quickly as extra why The steadiness of the legs is so important.

Making The Cut

I started slicing dimensional lumber on a rework job And located the preliminary reduces to be straight and right. The ruler on The sting of the desk Allows you to make quick meaconstructivements and the pfinalic marker – as quickly as dialed in – enconstructives You will get very right Everytime you’re doing finish work the place You will Have The power to’t have gaps or shadows. The Hitachi desk noticed definitely has The power and precision to do the work You’d like it to do, however I’d be remiss if I didn’t level out a blade heel drawback completely different considerers have uncowled. The adjustment to make the blade parallel with the miter slots and fence isn’t talked about Inside the guide and requires you to take away a pair of bolts beneath the desk to make the adjustment.

That Looks like Tons to Bear, however, the guide provides instruction on The biggest Method To regulate the fence, riving knife, and bevel to the blade’s current place if it’s barely out. I’d start with those a lot simpler to entry modifications to get your blade sq. first. I’d solely go beneath to make the adjustment in a worst case state of affairs if The completely differents don’t work.

Professional Tip

Make constructive you’re supplying The right quantity of amps to the noticed – Simply Since the motor runs on 15 amps doesn’t imply the twine is supplying it. Do You’d like to’re ravenous it for amps, it’s going to lavatory down or Burn up.

The Subsequent Bevel

Assuming the blade, miter gauge, and fence are all in The identical plane, All of your reduces – together with bevels – Shall be right. The bevel/peak adjustment wheel works like Ancompletely different desk noticed you’ve seen, so there’s nothing novel there. The bevel lock lever is a pfinalic-to-metallic connection Which will slide right off And ought to probably put on down. It’s not terribly unusual for this class and an space I’d Want to see some enchancment throughout the board.

Faucet The Brakes

The blade brake Is An excellent protectedty nicection. It’s furtherly useful. Ready on the blade to cease earlier than shifting The supplies is annoying. A spinning blade May set off kickagain, damage to your work, and damage. It’s good apply To behave round blades as if they don’t have brakes. But in any event, the brake saves us time and potential damage. Also fantastic is the onboard storage for the push stick, blade wrenches, And rope wrap, However the miter gauge is Slightly wobbly. It actually fell out A pair of events in transport, so just Make constructive it’s safe.

The beneathfacet Line

The safe and extremely effective Hitachi desk noticed is Full of options that any Professional ought to love, together with The Most very important rip performance in its class. It’s constructed for soup-to-nuts work from dimensional lumber to sheet suppliess. The slicing, fpreviousing, and transporting options work remarkably properly.

It’s not with out its weaknesses, however. It’s troublesome to heel for all however In all probability the most affected person and expert mans, the miter gauge can’t be stowed safely, and the bevel lock lever Is Sort of flimsy. While the blade heeling Is definitely the standout amongst those spaces for enchancment, completely different modifications are constructed-in into the noticed’s fence, riving knife, and bevel to primarytain away from having to go the troublesome route.

At $688.22, The mannequin new Hitachi desk noticed Is out there in a bit under DeWalt’s $580 machine, which the Hitachi might be mistaken for at A look if it wasn’t for The colours. Nonetheless, there are supplies variations Which might persuade A expert To choose one over The completely different. But for The worth, the nicection set Is Sort of engaging And it will undoubtedly show to be extra than enough noticed For A lot of clients.

Hitachi Table Saw C10RJ Features

  • Direct drive common 4,500 RPM 15 Amp motor
  • Soft start pertype reduces noise and recoil at start-up
  • Electrical brake
  • 10-inch 40-Tooth carbide tipped blade included
  • Bevel differ of 0 levels to 45 levels for reduces Starting from 3-1/8-inch (at 0 levels) to 2-1/4-inch (at 45 levels)
  • 28-3/4-inch x 22-inch working desk top with out feed assist of 28-3/4-inch x 2-inch
  • Telescoping desk extension assists 35-inches of ripping performance to The biggest and 22-inches to the left
  • Entrance bevel scale and peak adjustment knobs
  • Outfitted with a 3/4-inch T-slot miter gauge that Includes a huge scale with adjusafe constructive ceases at 0, 15, 30, 45 and 60 levels to the left and right To assist information supplies rightly for a extra true reduce
  • On-system accent storage
  • 8 x 13/16-inch Dado performance
  • Sdesk And sturdy fprevious & roll stand
  • Large 8-inch rubber, all-terrain treaded wheels
  • Overload safety
  • Riving knife
  • Overmeasurementd power change with emergency off protectedty cowl
  • Rear-placeed 2-Half inch mud port
  • 2-yr restricted guarantee

Hitachi Table Saw C10RJ Specs

  • Model Number: Hitachi C10RJ
  • Blade Size: 10-inch
  • Motor: 15 Amp 120V – 60Hz
  • No-Load Velocity: 4,500 RPM
  • Blade Sort Included: 40T Carbide Tipped
  • Table Material: Aluminum
  • Working Table Size: 28-3/4 x 22-inch
  • Outfeed Support Size: 28-3/4  x 2-inch
  • Max Rip Capacity Proper: 35-inch
  • Max Rip Capacity Left: 22-inch
  • Cut Depth @ 0 Degrees: 3-1/8-inch
  • Max Cut Depth @ 45 Degrees: 2-1/4-inch
  • Max Width of Dado: 8 x 13/16-inch
  • Soft Start: Sure
  • Electrical Brake: Sure
  • Dust Port Size: 2-Half-inch
  • Fprevious & Roll Stand: Included
  • Tool Weight (Assembled): 96 lbs
  • Warranty: 2-Year
  • Worth: $688.22

Store Amazon



Leave a Reply

Your email address will not be published. Required fields are marked *